1 -3
BEFORE USE
When the machine is not in use, it should be stored safely, not on the floor as protruding
parts could cause injury if a person fell on the machine.
Not doing so could cause an injury.
Use with the front cover and the side cover closed.
Not doing so could cause an injury.
Before replacing the needle or presser foot or when threading, switch the machine off.
Not doing so could cause an injury.
Do not look away from the needle while operating the machine.
If the needle breaks it could cause an injury.
Do not touch moving parts such as the needle, upper cutter, take-up lever or hand
wheel.
Doing so could cause an injury.
Children should only use the machine under the supervision of a parent or a guardian.
Otherwise they could injure themselves.
Do not use when young children are near the machine.
They could touch the needle and be injured.
Before leaving the machine after using it, remove the power plug from the outlet.
Not doing so could cause an injury.
Before using the machine, make sure that the presser foot holder set screw, needle
set screw and needle plate set screw are firmly tightened, and that the presser foot
is properly set in the presser foot holder.
Not doing so could cause an injury.
Do not perform the following
actions.
Doing so could cause an injury.
Overlocking without lowering the presser foot.
Overlocking while the needle is incorrectly installed.
Using a bent needle.
Overlocking while jerking the fabric.
Do not operate on an unstable surface such as a sofa or a bed.
If the machine falls down, it could cause an injury or damages to the machine.
Do not drop or insert any foreign objects into any openings.
Doing so could cause an injury or damages to the machine.
Do not repair, disassemble or modify except what is mentioned in the instruction
manual.
Doing so could cause an electric shock, a fire or an injury.
Summary of Contents for SL1A Series
Page 1: ......