Toyota RAV4 2007 Owner'S Manual Download

Page: 60 / 447

’07 Rav4_U (L/O 0608)

2007 RAV4 from July ’06 Prod. (ON42621U)

1. Hold the center of the lever and pull

it  up.  Then  slide  the  rear/second
seats  fully  backward  and  pull  it  for-
ward  slightly  until  it  locks.

2. Remove the front head restraint.

Push  the  seat  position  adjusting
switch  forward  to  slide  the  seat  to
the  front

−

most position.

3. Move the seatback angle adjusting

switch backward to flatten the seat-
back.

After returning the seat to its original
position, be certain to replace the head
restraint.

—Flattening seatbacks
(power seat)

Summary of Contents for RAV4 2007
































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 2007

Reviews:

Related manuals for RAV4 2007

Brands by name

Popular brands

Toyota RAV4 2007, Owner'S Manual

Search results

Summary of Contents for RAV4 2007

Reviews:

Related manuals for RAV4 2007

Brands by name

Popular brands