H4332
ISSUE 1: 25/08/2015
Accessory Part No. PZQ14-42070
Page 4 of 7
RAV 4 ACRYLIC HEADLAMP COVERS
4.
At the previously noted and marked locations, clean the
headlamp lens with the alcohol wipe provided. Remove any
residue with a clean dry cloth.
At the outer bottom clip position adhere two thirds of one
anti-abrasive tape strip to the headlamp face directly above
the pen mark on the bumper.
At the inner bottom clip position adhere one anti-abrasive
tape strip to the underside of the headlamp lens directly
above the pen mark on the bumper.
Remove pen marks from the bumper with the alcohol wipe
provided.
See Dia #4.
AUTOMOTIVE
SURFACE CLEANER
For use in cleaning painted metal,
glass and other vehicle surfaces.
Read installation instructions
before use.
IMPREGNATED WITH 70% ISOPROPYL ALCOHOL
Diagram #: 5
5.
At the previously noted positions, fit the inner bottom
metal clip between the bumper and headlamp assembly.
Ensure that the metal clip is located on the anti-abrasive
tape strip and not on the headlamp lens.
See Dia #5.
Note: If clip is difficult to insert, carefully pry the bumper
down using a plastic pry bar.
Diagram #: 4
INNER
OUTER
