H4332
ISSUE 1: 25/08/2015
Accessory Part No. PZQ14-42070
Page 3 of 7
RAV 4 ACRYLIC HEADLAMP COVERS
AUTOMOTIVE
SURFACE CLEANER
For use in cleaning painted metal,
glass and other vehicle surfaces.
Read installation instructions
before use.
IMPREGNATED WITH 70% ISOPROPYL ALCOHOL
1.
Open the bonnet and thoroughly clean and dry headlamps
and surrounding areas.
Trial fit the Headlamp Cover centrally on the headlamp.
Note the slot at the top of the Headlamp Cover and mark this
location onto the headlamp assembly.
Note the two holes at the bottom of the Headlamp Cover and
mark these locations onto the bumper directly below the
holes.
Note the dual-lock disc attached to the Headlamp Protector.
Remove the Headlamp Cover.
See Dia #1.
Note: Use a Non-Permanent Marker.
Diagram #: 1
RHS SHOWN (LHS IS A MIRROR IMAGE)
2.
Carefully peel back the rubber extrusion past the noted
top metal clip location. Do not fully remove the rubber
extrusion.
See Dia #2.
Diagram #: 1
3.
At the previously noted and marked location, clean the
headlamp lens and remove pen marks with the alcohol wipe
provided. Remove any residue with a clean dry cloth.
Fit the Headlamp Cover centrally on the headlamp, holding it
approximately 1-2cm off the headlamp surface. Adhere two
thirds of the anti-abrasive tape directly below the slot onto
the headlamp surface
Remove Headlamp cover.
See
Dia #3.
Diagram #: 3
