TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 17 of 27 pages
Issue: C 08/19/10
6.
Partial Reassembly.
(a)
Reassemble the Vehicle, except for the
Passenger's Cowl Cover, and Step Cover.
(1)
Reconnect any disconnected connectors.
(2)
Torque the Passenger’s Knee Air Bag to
88.5 in•lbf (10 N•m).
(b)
Verify the Short Pin is installed. (Fig. 6-1)
(1)
If not, install the Short Pin.
7.
Registration Process.
(a)
Open the Hood. (Fig. 7-1)
Note:
Do not close the Hood during the
Registration Setting Procedure. (Steps b-cc)
(b)
Temporarily reconnect the Vehicle's
Negative Battery Cable. (Fig. 7-2)
CAUTION:
Do not touch the positive terminal.
(c)
Locate the V4 Harness’s 1P RES
Diagnostic Connectors in the Passenger’s
Side Cowl Area, and remove the Tape.
(Fig. 7-3)
(d)
Connect the 2 RES Diagnostic Connectors.
(Fig. 7-3)
Fig. 6-1
Install Short Pin
Fig. 7-1
EXAMPLE
Fig. 7-3
RES
Diagnostic 1P
Connectors
V4 Harness
Fig. 7-2
Negative Battery Cable
Battery
