TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 14 of 27 pages
Issue: C 08/19/10
5.
V4 Wire Harness Installation (continued).
(a)
Route the V4 Harness behind the Vehicle
Brace and ECU Brackets as shown.
(b)
Secure the V4 Harness to the Vehicle Brace
with 1 Wire Tie. (Fig. 5-1)
(c)
Locate the Vehicle’s 5P White Connectors.
(Fig. 5-2)
(d)
Disconnect the Vehicle’s 5P White
Connectors. (Fig. 5-2)
(e)
Connect the V4 5P Connectors in between
the Vehicle’s 5P Connectors. (Fig. 5-3)
(f)
Secure the V4 Harness to the Vehicle
Harness with 1 Wire Tie. (Fig. 5-4)
(g)
Secure the 5P Connectors to the Vehicle
Harness with 1 Wire Tie. (Fig. 5-4)
Fig. 5-2
Fig. 5-3
Fig. 5-4
Side Cutter
Fig. 5-1
Side Cutter
Wire Tie
