Toyota Prius HSD 2006 Owner'S Manual Download

Page: 426 / 465

409

When a tire is replaced, the wheel

should always be balanced.

An unbalanced wheel may affect ve-

hicle handling and tire life. Wheels

can get out of balance with regular

use and should therefore be balanced

occasionally.

When replacing a tubeless tire, the

air valve should also be replaced

with a new one.

82p104a

To equalize tire wear and help ex-

tend tire life, Toyota recommends

that you rotate your tires accord-

ing to the maintenance schedule.

(For scheduled maintenance infor-

mation, please refer to the “Sched-

uled Maintenance Guide” or “Own-

er’s Manual Supplement”.)

However, the most appropriate tim-

ing for tire rotation may vary ac-

cording to your driving habits and

road surface conditions.

The wheel assemblies must be ro-

tated as illustrated above.

When rotating tires, check for uneven

wear and damage. Abnormal wear is

usually caused by incorrect tire infla-

tion pressure, improper wheel align-

ment, out

−

balance wheels, or se-

vere braking.

CAUTION

Do not include a compact spare

tire when rotating the tires. It is

designed for temporary use only.

Rotating tires

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands