Toyota Prius 2018 Page 214 Owner'S Manual Download

Page: 214 / 820

214

PRIUS_OM_OM47B89U_(U)

4-1. Before driving

Driving the vehicle

→

P. 231

With the brake pedal depressed, shift the shift position to D.
(

→

P. 240)

Check that the shift position indicator shows D.

Release the parking brake. (

→

P. 247)

Gradually release the brake pedal and gently depress the accelera-
tor pedal to accelerate the vehicle.

With the shift position in D, depress the brake pedal.

If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the shift
position to P. (

→

P. 241)

Stop the vehicle completely.

Set the parking brake. (

→

P. 247)

Shift the shift position to P. (

→

P. 241)

Check that the shift position indicator shows P.

Press the power switch to stop the hybrid system.

Slowly release the brake pedal.

Lock the door, making sure that you have the electronic key on your
person.

If parking on a hill, block the wheels as needed.

The following procedures should be observed to ensure safe
driving:

Starting the hybrid system

Driving

Stopping

Parking the vehicle

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands