Toyota Prius 2010, Owner'S Manual

Page: 564 / 635

542
5-2. Steps to take in an emergency
Changing “POWER” switch modes and starting the hybrid sys-
tem
Apply the brakes and touch the
Toyota emblem side of the
electronic key to the “POWER”
switch.
An alarm will sound to indicate
that the start function cannot
detect the electronic key that is
touched to the “POWER” switch if
any of the doors is opened and
closed while the key is touched to
the switch.
To change “POWER” switch modes: Within 10 seconds of the
buzzer sounding, release the brake pedal and press the
“POWER” switch. Modes can be changed each time the
switch is pressed. (
→
P. 164)
To start the hybrid system: Press the “POWER” switch within
10 seconds after the buzzer sounds, keeping the brake pedal
depressed.
In the event that the “POWER” switch still cannot be operated, con-
tact your Toyota dealer.
ITO52P165
STEP 1
■
Stopping the hybrid system
Push the “P” position switch and press the “POWER” switch as you normally
do when stopping the hybrid system.
■
Replacing the key battery
As this procedure is the temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery depletes.
(
→
P. 460)
STEP 2
www.mycar.pk Umar: 03214530584 www.prius.pk
mycar.pk