Toyota Prius 2010, Owner'S Manual

Page: 269 / 635

243
2-4. Using other driving systems
2
Wh
en drivin
g
Hill-start assist control
■
Hill-start assist control operating conditions
The system operates in the following situations:
• The shift position is in other than “P”.
• The parking brake is not applied.
• The accelerator pedal is not depressed.
■
Hill-start assist control
●
While hill-start assist control is operating, the brakes remain automati-
cally applied after the driver releases the brake pedal. The stop lights and
the high mounted stoplight turn on.
●
Hill-start assist control operates for about 2 seconds after the brake pedal
is released.
●
If the slip indicator does not flash and the buzzer does not sound when
the brake pedal is further depressed, slightly reduce the pressure on the
brake pedal (do not allow the vehicle to roll backward) and then firmly
depress it again. If the system still does not operate, check that the oper-
ating conditions explained above have been met.
Hill-start assist control helps to prevent the vehicle from rolling
backwards when starting on incline or slippery slope.
To engage hill-start assist con-
trol, further depress the brake
pedal when the vehicle is
stopped completely.
A buzzer will sound once to
indicate the system is acti-
vated. The slip indicator will
also start flashing.
ITO24P109
www.mycar.pk Umar: 03214530584 www.prius.pk
mycar.pk