Toyota Previa Owner'S Manual Download Page 30

Page: 30 / 175

CAUTION

Do not install the seat facing back-
ward. In an accident, passengers
facing backward are more likely to be
seriously injured because bench
type second seat has no seat belts
for passengers facing rearward.

Push the lock release knob and turn
the seat clockwise for the right seat
and counterclockwise for the left seat.

Hold the lock release lever until you have
moved the seat slightly.
To return the seat, rotate the seat in the re-
verse direction.

CAUTION

Do not set the seat in the lateral
position. Have the seat face either
forward or backward only.

Use the seat only in the forward
facing position while the vehicle is
in motion.

—Swiveling second seats
(swivel type)

Summary of Contents for Previa
















































































































































































Search results

Summary of Contents for Previa

Reviews:

Related manuals for Previa

Brands by name

Popular brands

Toyota Previa, Owner'S Manual

Search results

Summary of Contents for Previa

Reviews:

Related manuals for Previa

Brands by name

Popular brands