Toyota Land Cruiser 2008 Manual Download Page 403

Page: 403 / 531

408

4-3. Do-it-yourself maintenance

L/C200_U_(L/O_0708)

Remove the filter case.

Remove the air conditioning
filter and replace it with a new
one.

The “

↑

UP” marks shown on

the filter should be pointing up.

Cleaning method

If the filter is dirty, clean by
blowing

compressed

air

through the filter from the
downward side.

Hold  the  air  gun  2  in.  (5  cm)
from  the  filter  and  blow  for
approximately 2 minutes at 72
psi  (500  kpa,  5.0  kgf/cm

bar).

If it is not available, have the
filter cleaned by your Toyota
dealer.

ITY43C030

STEP

ITY43C090

STEP

Summary of Contents for Land Cruiser 2008




















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2008

Reviews:

Related manuals for Land Cruiser 2008

Brands by name

Popular brands

Toyota Land Cruiser 2008, Manual

Search results

Summary of Contents for Land Cruiser 2008

Reviews:

Related manuals for Land Cruiser 2008

Brands by name

Popular brands