Toyota Land Cruiser 2008 Manual Download Page 187

Page: 187 / 531

189

2-4. Using other driving systems

Wh
en
drivin

L/C200_U_(L/O_0708)

If a message is displayed on the multi-information display

→

P. 460

Certification

CAUTION

When using the Toyota park assist system

Observe the following precautions.

Failing to do so may result in the vehicle being unable to be driven safely
and possibly cause an accident.

Do not use the sensor at speeds in excess of 6 mph (10 km/h).

When moving forward or reversing, always check your surroundings for
safety and drive carefully.

Do not install accessories within the sensors’ detection areas.

NOTICE

When washing the vehicle

Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interfer-

ence that may cause undesired operation.

Summary of Contents for Land Cruiser 2008




















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2008

Reviews:

Related manuals for Land Cruiser 2008

Brands by name

Popular brands

Toyota Land Cruiser 2008, Manual

Search results

Summary of Contents for Land Cruiser 2008

Reviews:

Related manuals for Land Cruiser 2008

Brands by name

Popular brands