Toyota JCE10, Wiring Diagram Manual, Page: 3 / 36

A INTRODUCTION
This manual consists of the following 13 sections:
No.
A
B
C
D
E
F
G
H
1
J
K
L
M
Section
INDEX
INTRODUCTION
HOW TO USE THIS
MANUAL
TROUBLE-
SHOOTING
ABBREVIATIONS
GLOSSARY OF
TERMS AND
SYMBOLS
RELAY LOCATIONS
ELECTRICAL
WIRING ROUTING
INDEX
SYSTEM CIRCUITS
GROUND POINT
POWER SOURCE
(Current Flow Chart)
CONNECTOR LIST
PART NUMBER OF
CONNECTORS
OVERALL
ELECTRICAL
WIRING DIAGRAM
Description
Index of the contents of this manual.
Brief explanation of each section.
Instructions on how to use this manual.
Describes the basic inspection procedures for electrical circuits.
Defines the abbreviations used in this manual.
Defines the symbols and functions of major parts.
Shows position of the Electronic Control Unit, Relays, Relay Block, etc.
This section is closely related to the system circuit.
Describes position of Parts Connectors, Splice points, Ground points, etc.
This section is closely related to the system circuit.
Index of the system circuits.
Electrical circuits of each system are shown from the power supply through ground
points. Wiring connections and their positions are shown and classified by code
according to the connection method. (Refer to the section, "How to use this manual").
The "System Outline" and "Service Hints" useful for troubleshooting are also contained
in this section.
Shows ground positions of all parts described in this manual.
Describes power distribution from the power supply to various electrical loads.
Describes the form of the connectors for the parts appeared in this book.
This section is closely related to the system circuit.
Indicates the part number of the connectors used in this manual.
Provides circuit diagrams showing the circuit connections.
2