38
39
18. Align gas strut bracket (18) to hole position “B” on the LHS. Place the support bracket (33) inside the tub and secure
using M6 bolts, washers and nuts, (Torque 8Nm). Repeat for RHS.
See Dia #18
.
10mm
13mm
Hard Tonneau Cover, A-Deck
Accessory Part No. PZQ70-89870
TC0403c
Page 10 of 34
Accessory Part No. PZQ70-89870
ISSUE 4: 09/10/18
Diagram #17
Diagram #18
C
C
17. Install the jacking bolts and nuts to the jacking brackets as shown.
Attach the jacking bracket (22) to position (C)
using M8 bolts, flat washers and M8 nuts.
(Torque 8Nm). Repeat for RHS.
See Dia#17
.
B
B
SIDE RAIL
SECTION VIEW
35
19
22
24
23
23
24
31
29
30
18
33
14
21
TORQUE 8Nm
TORQUE 8Nm
FRONT OF
THE VEHICLE
40
40
41
41
42
42
Diagram #16
SECTION
VIEW
16. Attach the Pin Switch Contact Plate (42) to the top of the Header Bar and the Harness Bracket to the bottom using
two M5 bolts (39), washers (40) and Nylock nuts (38). Torque to 5Nm.
See Dia #16.
