Toyota Hilux 2017 Owner'S Manual Download Page 222

Page: 222 / 266

222

3. ROUTE GUIDANCE

HILUX_TOYOTA FORTUNMM_OM0K314E_(EE)

16.04.18 14:53

Display the route information screen.
(

→

P.219)

Select .

Select

“Show list of destinations”

Select

of the desired stopover.

The order of the stopovers can be
changed by dragging them to the desired
position in the list.

Select the desired item.

When the stopover(s) is deleted, the route
will be recalculated.

EDITING STOPOVERS

No.

Function

Select to register the stopover in the
favourites list. (

→

P.227)

Select to delete the stopover.

Select to delete all stopovers.

INFORMATION

●

If the main destination is deleted, the
last stopover before the deleted destina-
tion will become the new main destina-
tion.

HILUX_TOYOTA FORTUNMM_OM0K314E_(EE).book Page 222 Monday, April 18, 2016 3:01 PM

Summary of Contents for Hilux 2017











































































































































































































































































Search results

Summary of Contents for Hilux 2017

Reviews:

Brands by name

Popular brands

Toyota Hilux 2017, Owner'S Manual

Search results

Summary of Contents for Hilux 2017

Reviews:

Brands by name

Popular brands