Toyota Hilux 2017 Owner'S Manual Download Page 130

Page: 130 / 266

130

3. SHORT MESSAGE FUNCTION

HILUX_TOYOTA FORTUNMM_OM0K314E_(EE)

16.04.18 14:53

Select

“Reply free text”

“Reply

template”

When

“Reply template”

is selected,

select the desired template.

Enter the message and then select

“OK”

The short message will be sent.

Display the phone menu screen and
select

“Messages”

. (

→

P.108)

Select the

“Sent”

tab.

Select the desired short message.

The state of a message is shown by the
following icons.

: Sent succeeded

: Sent failed

: Sending

Check that the message is displayed.

“Re-send”

: Select to re-send the mes-

sage.

“Re-send”

is displayed if sending

the text message has failed.

No.

Function

Select to call the sender.

Select to reply to the short message
by free text.

Select to reply to the short message
by template.

REPLYING TO A SHORT
MESSAGE

INFORMATION

●

“Reply free text” function is not available
while driving.

CHECKING SENT SHORT
MESSAGES

HILUX_TOYOTA FORTUNMM_OM0K314E_(EE).book Page 130 Monday, April 18, 2016 3:01 PM

Summary of Contents for Hilux 2017











































































































































































































































































Search results

Summary of Contents for Hilux 2017

Reviews:

Brands by name

Popular brands

Toyota Hilux 2017, Owner'S Manual

Search results

Summary of Contents for Hilux 2017

Reviews:

Brands by name

Popular brands