Toyota Highlander 2021 Quick Reference Manual Download Page 19

Page: 19 / 72

OVERVIEW

FEATURES & OPERATIONS

TOYOT

A SAFETY SENSE

SAFETY & EMERGENCY FEATURES

Push

Turn

When the steering lock cannot be released, “Push Power Button while Turning

Steering Wheel in Either Direction” will be displayed on the Multi-Information

Display. Check that the shift lever is in P. Press the power button shortly and firmly

while turning the steering wheel left and right.

Steering lock release

Hold wheel, push lever down, set angle and length, and return lever.

Angle

Lock release lever

NOTE: Do not attempt to adjust while the vehicle is in motion.

Length

Tilt & telescopic steering wheel

Lock

Unlock

Door locks

130494_MY21_Highlander_QRG_V7_ML_070821_PRINT_R1.indd 17

7/9/21 6:46 AM

Summary of Contents for Highlander 2021









































































Search results

Summary of Contents for Highlander 2021

Reviews:

Related manuals for Highlander 2021

Brands by name

Popular brands

Toyota Highlander 2021, Quick Reference Manual

Search results

Summary of Contents for Highlander 2021

Reviews:

Related manuals for Highlander 2021

Brands by name

Popular brands