Corolla
TNS600
Corolla (RHD) -
13
01-07
1.
Route the antenna cord
as shown in
the illustration.
Fig. 12
2.
Cut the red/white wire away
and
isolate .
2
1
Fig. 13
WIRE HARNESS INSTALLATION
Fig. 14
●
WIRE SPLICING CONNECTOR
INSTRUCTIONS
3.
a)
Remove appropriate amount of tape
wrapping the vehicle side harness to be
connected.
b)
Insert the vehicle harness
to be con-
nected securely into the guide slit.
c)
After inserting the vehicle side harness
into the guide slit, fix the splicing con-
nector
, and lock it securely using a
plier
until the connector clicks.
