Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 108 / 491

106

COROLLA HV_ 国瑞 _GE

2-1. Instrument cluster

■

Route guidance to destination dis-
play

When the route guidance to destination

display is enabled on the head-up dis-

play, it will not be displayed on the

multi-information display. (



P.110)

Select to enable selection of an

audio source or track on the meter

using the meter control switches.

This menu icon can be set to be dis-
played/not displayed in

■

Display items



Drive information



Energy monitor (



P.113)

■

Drive information

Displays drive information such as the

following:

Drive information type
Drive information items

Displays the following depending

on which drive information type and

drive information items were

selected in

. (



P.106)



After start

• Distance: Displays the distance

driven since hybrid system start

• Elapsed time: Displays the elapsed

time since hybrid system start

• Average vehicle speed: Displays the

average vehicle speed since hybrid

system start



After reset

• Distance: Displays the distance

driven since the display was reset

• Elapsed time: Displays the elapsed

time since the display was reset

• Average vehicle speed: Displays the

average vehicle speed since the dis-
play was reset

: To reset, display the desired item and

press and hold the

meter control

switch.

■

Meter display settings that can
be changed



Clock setting (vehicles with navi-

gation/multimedia system)



P.93, 99



Language

Select to change the language dis-

played.



Units

Select to change the units of measure

displayed.



Speedometer display (7-inch dis-

play)

Select to set the display of the speed-

Audio system-linked dis-
play (if equipped)

Vehicle information display

Settings display

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands