Toyota COROLLA CROSS, Manual

Page: 376 / 612

376
5-13. Phone operation (Hands-free system for cellular phones)
Select to display the keypad
to send tones. (

P.376)
Select to send tones. This
button only appears when a
number that contains a (w) is
dialed in hands-free mode.
(

P.376)
Select to adjust your voice
volume that the other party
hears from their speaker.
(

P.377)
Select to mute your voice to
the other party.
Select to change handset
modes between hands-free
and cellular phone.
Select to put a call on hold.
To cancel this function, select
“Activate”.
Select to hang up the phone.
●
Changing from hands-free call to
cellular phone call is not possible
while driving.
●
Only when the vehicle is not mov-
ing, the contact image can be dis-
played.
●
When cellular phone call is
changed to hands-free call, the
hands-free screen will be dis-
played and its functions can be
operated on the screen.
●
Changing between cellular phone
call and hands-free call can be
performed by operating the cellu-
lar phone directly.
●
Transferring methods and opera-
tions will be different depending
on the type of cellular phone you
have.
●
For the operation of the cellular
phone, see the manual that
comes with it.
■
By keypad
This operation cannot be per-
formed while driving.
1
Select “0-9”.
2
Enter the desired number.
■
By selecting “Release
Tones”
“Release Tones” appear when a
continuous tone signal (s) con-
taining a (w) is registered in the
contact list.
This operation can be per-
formed while driving.
Select “Release Tones”.
Talking on the Blue-
tooth
®
hands-free sys-
tem
While talking on the phone,
the following screen is dis-
played. The operations out-
lined below can be
performed on this screen.
Call screen operation
Sending tones
www.carobook.com