Toyota Celica 2002 Operating Manual Download Page 26

Page: 26 / 231

’02MY CELICA U (L/O 0108)

2002 MY CELICA_U (OM20792U)

3. SEAT CUSHION ANGLE ADJUSTING

KNOB

Turn the knob either way.

For easy access to the rear seat, do
this.

1. Lift the seatback angle adjusting lever

or press the pedal behind the seat-
back.

The seat will slide forward.

2. Move the seat to the front–most posi-

tion.

After passengers are in, lift up the seat-
back and return the seat until it locks.

CAUTION

After putting back the seat, try
pushing the seat forward and rear-
ward to make sure it is secured in
place.

Never allow anyone to rest their
foot on the release pedal while the
vehicle is moving.

—Moving passenger’s seat for
rear seat entry

Summary of Contents for Celica 2002








































































































































































































































Search results

Summary of Contents for Celica 2002

Reviews:

Brands by name

Popular brands

Toyota Celica 2002, Operating Manual

Search results

Summary of Contents for Celica 2002

Reviews:

Brands by name

Popular brands