Toyota CAMRY HV, Manual

Page: 399 / 636

399
4-5. Using the driving support systems
CAMRY_HV_EE
4
D
riv
in
g
■
Re-enabling the Rear Crossing Traffic Auto Brake function
To re-enable the Rear Crossing Traffic Auto Brake function when it is disabled
while it is operating, either enable the Intelligent Clearance Sonar system
again (

P. 385), or turn the power switch off and then back to ON mode.
When the function is disabled, the ICS OFF indicator will illuminate.
(

P. 133)
If there is no longer a vehicle approaching from the right or left at the rear of
the vehicle when backing up, or if the traveling direction of the vehicle
changes (such as changing from backing up to moving forward), the system
will be re-enabled automatically. When the function is re-enabled, the ICS
OFF indicator will turn off.
■ Conditions under which the Rear Crossing Traffic Auto Brake function
will not detect a vehicle
The Rear Crossing Traffic Auto Brake function is not designed to detect the
following types of vehicles and/or objects:
●
Vehicles approaching from directly behind
●
Vehicles backing up in a parking space next to your vehicle
●
Guardrails, walls, signs, parked vehicles and similar stationary objects
*
●
Small motorcycles, bicycles, pedestrians, etc.
*
●
Vehicles moving away from your vehicle
●
Vehicles approaching from the parking spaces next to your vehicle
*
*
: Depending on the conditions, detection of a vehicle and/or object may
occur.
■
RCTA function buzzer
Regardless of whether the RCTA function is enabled or not (

P. 357), if the
Rear Crossing Traffic Auto Brake function is enabled and brake control is per-
formed, a buzzer will sound to notify the driver.
● Vehicles that the sensors cannot detect
due to obstructions
●
Vehicles which suddenly accelerate or
decelerate near your vehicle