Toyota CAMRY HV, Manual

Page: 178 / 636

178
3-2. Opening, closing and locking the doors
CAMRY_HV_EE
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the power switch off.
When the indicator light on the key surface is not on, press and hold or
for approximately 5 seconds while pressing and holding .
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
.)
Vehicles with an alarm: To prevent unintended triggering of the alarm, unlock
the doors using the wireless remote control and open and close a door once
after the settings have been changed. (If a door is not opened within 30 sec-
onds after
is pressed, the doors will be locked again and the alarm will
automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (

P. 126)
1
2
2
Multi-information
display
Unlocking doors Beep
(Left-hand drive
vehicles)
Holding the driver’s door
handle unlocks only the
driver’s door.
Exterior: Beeps 3 times
Interior: Pings once
(Right-hand drive
vehicles)
Holding the front passen-
ger’s door handle unlocks
all the doors.
Holding either front door
handle unlocks all the doors. Exterior: Beeps twice
Interior: Pings once