Toyota C-HR2018, Owner'S Manual

Page: 242 / 516

242
4-5. Using the driving support systems
C-HR_OM_USA_OM10526U
To change the set speed, operate the lever until the desired set speed
is displayed.
Increases the speed
(Except when the vehicle has been
stopped by system control in vehi-
cle-to-vehicle distance control
mode)
Decreases the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the lever up or down to change the speed,
and release when the desired speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
*
1
or 1 km/h (0.6 mph)
*
2
each time
the lever is operated

For the U.S. mainland, Hawaii
Large adjustment: Increases or decreases in 1 mph (1.6 km/h)
*
1
or 1 km/h
(0.6 mph)
*
2
increments for as long as the lever is held

For Canada, Guam and Puerto Rico
Large adjustment: Increases or decreases in 5 mph (8 km/h)
*
1
or 5 km/h
(3.1 mph)
*
2
increments for as long as the lever is held
In the constant speed control mode (
→
P. 246), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
*
1
or 1 km/h (0.6 mph)
*
2
each time
the lever is operated
Large adjustment: The speed will continue to change while the lever is
held.
*
1
: When the set speed is shown in “MPH”
*
2
: When the set speed is shown in “km/h”
Adjusting the set speed