Product details
Product guide – BT Levio W-series
33
Feature
It is possible to adapt the settings for speed, acceleration and braking characteris-
tics to the operator's level of experience and/or preferences. The truck can store up
to ten different settings.
Benefit
By adapting the truck to the operator and/or the application, damage caused by in-
experienced operators can be reduced while maximum productivity can be achieved
with experienced operators.
Machine register and service parameters
It is possible to see the machine-specific settings in this register, e.g. to confirm
service parameters, however, it is not possible to make changes in the register. An
example of service parameters are: service interval (time interval when the truck
signals service is required), automatic switch-off, battery type settings (to achieve
optimum battery discharge), and Creep speed.
Proceed as follows to confirm settings in the operator and machine-specific regis-
ter:
● Press the horn button and keep it pressed while starting the truck using either
PIN code entry or the ID unit.
The display then shows the various functions:
Operating hours and time remaining until next service (H)
Error codes (E)
Parameters (P)
Hardware and software version numbers (Pn)
● Release the horn button at the required display.
● To scroll between the settings for each mode, turn the speed control.
Summary of Contents for BT Levio LWE140
