Toyota 7FBEF 15, Service Manual

Page: 90 / 185

5-45
■
Tuning
General
This function performs fine adjustment of traveling and material handling controls.
When the use requests to limit the maximum speed or weaken the regenerative braking force, each setting
can be performed on the TUNING screen in the procedures same as power control level setting.
59 tuning items are prepared including spares.
Tuning items list
*1: 4-way mini lever models (OPT)
Tuning
No.
1
1
2
3
4
5
6
7
9
10
11
12
Item
Spare
Spare
Spare
8 7 6 5 4 3 2
Switchback regenerative breaking torque:
Changes the regenerative braking torque at
switchback.
Tilt power control:
Changes the pump motor output for when
the tilt switch is ON.
(The SAS function mast control speed is not limited.)
Auto-off function activation time:
Sets the time for activating auto-off function.
Attachment power control No.1:
Changes the pump motor output for when
attachment switch No.1 is ON.
Traveling speed limiter:
Adjust the maximum traveling speed.
Battery charge indicator correction:
Corrects decreasing rate of battery charge
indicator.
Battery warning setting level:
Changes the activation timings of low remaining
battery charge warning and battery
overdischarge warning. (See page 5-50.)
Acceleration OFF regenerative breaking torque:
Changes regenerative breaking torque when
acceleration is OFF.
Level ( : Initial setting position)
Weak
Weak
Low
speed
Low
speed
Low
speed
Fast
Strong
Strong
High
speed
High
speed
High
speed
None
None Short
Slow
decrease
Fast
decrease
Disabled
Slow
High
speed
8
Attachment power control No.2:
Changes the pump motor output for when
attachment switch No.2 is ON.
Low
speed
Long
*1