Toyota 7FBEF 15, Service Manual

Page: 80 / 185

5-35
I/O monitor 2
Displays each switch ON/OFF state and analog input voltages from sensors for traveling and swing
control.
Operation procedure
1. Display the ANALYZER MENU screen.
2. Press button (2) twice.
3. Check that “3. I/O MONITOR2” is displayed and press
button (3) (enter). I/O monitor function (2) is activated
and I/O 2-1 to I/O 2-6 are displayed sequential every
time button (3) is pressed.
4. Functions of buttons on the I/O MONITOR2 screen
are as follows:
Button (1): Unused
Button (2): Unused
Button (3): Displays I/O 2-1 to I/O 2-6 screens
sequentially
*:Press button (3) on the I/O 2-6 screen to display the
ANALYZER MENU screen.
Other screen cannot be displayed from I/O MONITOR2
screen.
Display ANALYZER MENU screen to display other
screen
(1) I/O 2-1 screen
POTA: Accelerator potentiometer voltage (V)
A: When the accelerator pedal is released
(SWAC: OFF)
Standard: 0.3 to 2.4 V
B: Standard voltage when the accelerator pedal is
depressed to its stroke end
Standard: 1.7 to 4.7 V
B - A = 1.4 V or above
SWAC: Accelerator switch
When the accelerator pedal is released
SWAC: 0 = OFF
Standard voltage when the accelerator pedal is
depressed to its stroke end
SWAC: 1 = ON
Operate the accelerator pedal to judge switch ON/
OFF quality.
S P H
S P H
MENU
= =
A N L M E N U
3 . I / O M N O I T O R 2
I/O 2-2 screen
S P H
S P H
MENU
< I / 0 2
1 >
P O T A W 7 1 S A C 0 0 .
Press button (3)
Press button (3)
Button (3)
Button (1)
Button (2)
ANALYZER MENU screen
(1) I/O 2-1 screen