manualshive.com logo in svg

Toyota 2016 Land Cruiser, Manual

Share
Download
Toyota 2016 Land Cruiser Manual Download Page 461

LC200_OM_OM60M88U_(U)

461

6-3. Do-it-yourself maintenance

6

Mainten

ance an

d ca

re

WARNING

■

How to recharge the battery

Only perform a slow charge (5A or less). The battery may explode if
charged at a quicker rate.

■

Emergency measures regarding electrolyte

●

If electrolyte gets in your eyes
Flush your eyes with clean water for at least 15 minutes and get immedi-
ate medical attention. If possible, continue to apply water with a sponge or
cloth while traveling to the nearest medical facility.

●

If electrolyte gets on your skin
Wash the affected area thoroughly. If you feel pain or burning, get medical
attention immediately.

●

If electrolyte gets on your clothes
It can soak through clothing on to your skin. Immediately take off the cloth-
ing and follow the procedure above if necessary.

●

If you accidentally swallow electrolyte
Drink a large quantity of water or milk. Get emergency medical attention
immediately.

NOTICE

■

When recharging the battery

Never recharge the battery while the engine is running. Also, be sure all
accessories are turned off.

Summary of Contents for 2016 Land Cruiser

































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands