112
LC200_OM_OM60M88U_(U)
3-2. Opening, closing and locking the doors
■
Changing the door unlock function setting
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the engine switch off.
When the indicator light on the key surface is not on, press and hold
or
for approximately 5 seconds while pressing and holding
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
.)
To prevent unintended triggering of the alarm, unlock the doors using the
wireless remote control and open and close a door once after the settings
have been changed. (If a door is not opened within 60 seconds after
is
pressed, the doors will be locked again and the alarm will automatically be
set.)
In a case that the alarm is triggered, immediately stop the alarm. (
P. 76)
1
2
2
Multi-information
display
Unlocking function
Beep
Holding the driver’s door
handle unlocks only the
driver’s door.
Exterior: Beeps 3
times
Interior: Pings once
Holding a passenger’s door
handle unlocks all the
doors.
Holding a door handle
unlocks all the doors.
Exterior: Beeps twice
Interior: Pings once
Summary of Contents for 2016 Land Cruiser
Page 7: ...7 1 8 7 6 5 4 3 2 LC200_OM_OM60M88U_ U 9 I n f o r ma t i o nP r o v i d e db y...
Page 24: ...24 Pictorial index LC200_OM_OM60M88U_ U I n f o r ma t i o nP r o v i d e db y...
Page 100: ...100 LC200_OM_OM60M88U_ U 2 Instrument cluster I n f o r ma t i o nP r o v i d e db y...
Page 372: ...372 LC200_OM_OM60M88U_ U 4 6 Driving tips I n f o r ma t i o nP r o v i d e db y...
