Toyota 2015 Sienna Manual Download Page 395

Page: 395 / 664

SIENNA_OM_01999-08001_(U)

395

5-10. Bluetooth

Audi

system

■

Bluetooth

antenna

The antenna is built into the display.

If the Bluetooth

device is behind the seat or in the glove box or console box,

or is touching or covered by metal objects, the connection status may deterio-

rate.

■

Battery charge/signal status

●

This display may not correspond exactly with the portable audio player or

cellular phone itself.

●

This system does not have a charging function.

●

The portable audio player or cellular phone battery will be depleted quickly

when the device is connected to Bluetooth

■

When using the Bluetooth

audio and hands-free system at the same

time

The following problems may occur.

●

The Bluetooth

audio connection may be interrupted.

●

Noise may be heard during Bluetooth

audio playback.

■

About the contact in this system

The following data is stored for every registered cellular phone. When

another phone is connecting, you cannot read the registered data.

●

Contact data

●

Call history

●

Favorite

●

Message

When removing a Bluetooth

phone from the system, the above-mentioned

data is also deleted.

■

About Bluetooth

The Bluetooth

word mark and logos are

registered trademarks owned Bluetooth

SIG, Inc. and any use of such marks by

PIONEER CORPORATION is under

license. Other trademarks and trade

names are those of their respective own-

ers.

Summary of Contents for 2015 Sienna

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sienna

Reviews:

Related manuals for 2015 Sienna

Brands by name

Popular brands

Toyota 2015 Sienna, Manual

Search results

Summary of Contents for 2015 Sienna

Reviews:

Related manuals for 2015 Sienna

Brands by name

Popular brands