Toyota 2015 Sienna Manual Download Page 189

Page: 189 / 664

SIENNA_OM_01999-08001_(U)

189

3-5. Opening, closing the windows and moon roof

Op
eration

f each
compo

nen
t

Press the switch to disable the

rear moon roof operation from the

rear seat.

Pressing the switch again will

enable the operation again.

■

The moon roof can be operated when

The engine switch is in the “ON” position (vehicles without a smart key sys-

tem) or IGNITION ON mode (vehicles with a smart key system).

■

Operating the moon roof after turning the engine off



Vehicles without a smart key system

The moon roof can be operated for approximately 45 seconds after the

engine switch is turned to the “ACC” or “LOCK” position. It cannot, however,

be operated once either front door is opened.



Vehicles with a smart key system

The moon roof can be operated for approximately 45 seconds after the

engine switch is turned to ACCESSORY mode or turned off. It cannot, how-

ever, be operated once either front door is opened.

■

Jam protection function

If an object is detected between the moon roof and the frame while the moon

roof is closing, travel is stopped and the moon roof opens slightly.

Canceling the rear moon roof operation (vehicles with the rear
moon roof)

Summary of Contents for 2015 Sienna

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sienna

Reviews:

Related manuals for 2015 Sienna

Brands by name

Popular brands

Toyota 2015 Sienna, Manual

Search results

Summary of Contents for 2015 Sienna

Reviews:

Related manuals for 2015 Sienna

Brands by name

Popular brands