Toyota 2013 Prius c Owner'S Manual Download Page 66

Page: 66 / 549

1-3. Opening, closing and locking the doors

Automatic door locking and unlocking systems

The following functions can be set or canceled:

■

Setting and canceling the functions

To switch between setting and canceling, follow the procedure
below:

Vehicles without a smart key system

Close all the doors and turn the engine switch to the “ON”
position. (Perform

within 20 seconds.)

Vehicles with a smart key system

Close all the doors and switch the “POWER” switch to ON
mode. (Perform

within 20 seconds.)

Function

Operation

Shift position linked
door locking function

Shifting the shift lever out of P locks all
doors.

Shift position linked
door unlocking function

Shifting the shift lever to P unlocks all doors.

Speed linked door lock-
ing function (vehicles
with a smart key sys-
tem)

All doors are locked when the vehicle speed
is approximately 12 mph (20 km/h) or
higher.

Driver’s door linked
door unlocking function
(vehicles without a
smart key system)

All doors are unlocked when the driver’s
door is opened within 45 seconds after turn-
ing the engine switch to “ACC” or “LOCK”.

Driver’s door linked
door unlocking function
(vehicles with a smart
key system)

All doors are unlocked when the driver’s
door is opened within 45 seconds after turn-
ing the “POWER” switch off.

STEP

Summary of Contents for 2013 Prius c






































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Prius c

Reviews:

Related manuals for 2013 Prius c

Brands by name

Popular brands

Toyota 2013 Prius c, Owner'S Manual

Search results

Summary of Contents for 2013 Prius c

Reviews:

Related manuals for 2013 Prius c

Brands by name

Popular brands