Toyota 2013 Prius c Owner'S Manual Download Page 242

Page: 242 / 549

244

3-1. Using the air conditioning system and defogger

■

Operation of the air conditioning system in Eco drive mode

In Eco drive mode, the air conditioning system is controlled as follows to pri-
oritize fuel efficiency:

●

Heating/cooling capacity is restricted.

●

Outside/recirculated air mode may automatically switch depending on
the temperature setting or the inside temperature.

●

Fan speed restricted when automatic mode is selected

To improve air conditioning performance, perform the following operations:

●

Adjust the fan speed or the temperature setting

●

Turn off Eco drive mode

■

Using automatic mode

Fan speed is adjusted automatically according to the temperature setting
and the ambient conditions.

Therefore, the fan may stop for a while until warm or cool air is ready to flow

immediately after

is pressed.

■

Fogging up of the windows

●

The windows will easily fog up when the humidity in the vehicle is high.

Turning

on will dehumidify the air from the outlets and defog the

windshield effectively.

●

If you turn

off, the windows may fog up more easily.

●

The windows may fog up if the recirculated air mode is used.

Summary of Contents for 2013 Prius c






































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Prius c

Reviews:

Related manuals for 2013 Prius c

Brands by name

Popular brands

Toyota 2013 Prius c, Owner'S Manual

Search results

Summary of Contents for 2013 Prius c

Reviews:

Related manuals for 2013 Prius c

Brands by name

Popular brands