Toyota 2007 Matrix Owner'S Manual Download Page 30

Page: 30 / 330

170

To use the box, push the lid.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the auxiliary box closed
while driving.

To use the box, push the knob.

To remove the auxiliary box, open the box
and pull it up.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the auxiliary box
closed while driving.

Do not use this auxiliary box as an
ashtray.

To access the rear console box, pull up
the lock release lever while raising the
rear console box lid.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the console box closed
while driving.

Auxiliary box (type B)

Auxiliary box (type C)

Rear console box (type A)

Summary of Contents for 2007 Matrix











































































































































































































































































































































Search results

Summary of Contents for 2007 Matrix

Reviews:

Related manuals for 2007 Matrix

Brands by name

Popular brands

Toyota 2007 Matrix, Owner'S Manual

Search results

Summary of Contents for 2007 Matrix

Reviews:

Related manuals for 2007 Matrix

Brands by name

Popular brands