Toyota 2007 Matrix Owner'S Manual Download Page 136

Page: 136 / 330

106

If the indicator or buzzer comes on...

Do this.

(h)

Take vehicle to Toyota dealer.
If brake system warning light is also on, stop immediately and contact Toyota dealer.

(i)

Close all side doors, back door and glass hatch.

(j)

Take vehicle to Toyota dealer immediately.

(k)

Take vehicle to Toyota dealer.

(l)

Adjust tire inflation pressure and turn off warning light by pushing reset switch for a
few seconds. If warning light remains, contact Toyota dealer.

(m)

Add washer fluid.

(n)

Replace engine oil.

Summary of Contents for 2007 Matrix











































































































































































































































































































































Search results

Summary of Contents for 2007 Matrix

Reviews:

Related manuals for 2007 Matrix

Brands by name

Popular brands

Toyota 2007 Matrix, Owner'S Manual

Search results

Summary of Contents for 2007 Matrix

Reviews:

Related manuals for 2007 Matrix

Brands by name

Popular brands