Toyota 2001 Tundra Owner'S Manual Download Page 77

Page: 77 / 297

’01 TUNDRA_U (L/O 0008)

2001 TUNDRA (OM34416U)

Routing
device

2. Route the top strap through the

routing device as shown in the il-
lustration.

CAUTION

Make sure the top strap is not
twisted.

3. Fix the child restraint system with

the seat belt.

Latch the hook onto the anchor
bracket on the side floor and tighten
the top strap.

For instructions to install the child re-
straint system, see “Child restraint” in this
section.

CAUTION

Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.

4. Replace the head restraint.

Summary of Contents for 2001 Tundra










































































































































































































































































































Search results

Summary of Contents for 2001 Tundra

Reviews:

Related manuals for 2001 Tundra

Brands by name

Popular brands

Toyota 2001 Tundra, Owner'S Manual

Search results

Summary of Contents for 2001 Tundra

Reviews:

Related manuals for 2001 Tundra

Brands by name

Popular brands