Home
/
Toyota
/
2001 MR2 Spyder
/
Owner'S Manual

Toyota 2001 MR2 Spyder, Owner'S Manual

Share

Page: 37 / 234

Toyota 2001 MR2 Spyder Owner'S Manual Download Page 37

01MY MR2(U) L/O 0008

33

2001 MR2 (OM17482U)

!

Remember  that  the  extender  pro-
vided  for  you  may  not  be  safe  when
used  on  a  different  vehicle,  or  for
another  person  or  at  a  different
seating  position  than  the  one  origi-
nally  intended  for.

SB13071

To  connect  the  extender  to  the  seat
belt,  insert  the  tab  into  the  seat  belt
buckle  so  that  the  “PRESS”  signs  on
the  buckle–release  buttons  of  the  ex-
tender  and  the  seat  belt  are  both  facing
outward  as  shown.

You will hear a click when the tab locks
into the buckle.

When  releasing  the  seat  belt,  press  on
the  buckle–release  button  on  the  extender,
not  on  the  seat  belt.  This  helps  prevent
damage  to  the  vehicle  interior  and  extend-
er  itself.

When not in use, remove the extender
and store in the vehicle for future use.

CAUTION

!

After  inserting  the  tab,  make  sure
the  tab  and  buckle  are  locked  and
that  the  seat  belt  extender  is  not
twisted.

!

Do  not  insert  coins,  clips,  etc.  in
the  buckle  as  this  may  prevent  you
from  properly  latching  the  tab  and
buckle.

!

If  the  seat  belt  does  not  function
normally,  immediately  contact  your
Toyota  dealer.  Do  not  use  the  seat
until  the  seat  belt  is  fixed.  It  cannot
protect  an  adult  occupant  or  your
child  from  injury.

«
...
35
36
37
38
39
...
»

Summary of Contents for 2001 MR2 Spyder











































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands