Toyota 2001 MR2 Spyder Page 22 Owner'S Manual Download

Page: 22 / 234

01MY MR2(U) L/O 0008

2001 MR2 (OM17482U)

Fuel tank cap

SB12085

This indicates that the fuel filler door is
on the left side of your vehicle.

SB12088

1. To open the fuel filler door, pull the

lever up.

When refueling, turn off the engine.

The fuel filler door opener lever can be
locked by the key.

CAUTION

Do  not  smoke,  cause  sparks  or  al-
low  open  flames  when  refueling.
The  fumes  are  flammable.

When  opening  the  cap,  do  not  re-
move  the  cap  quickly.  In  hot  weath-
er,  fuel  under  pressure  could  cause
injury  by  spraying  out  of  the  filler
neck  if  the  cap  is  suddenly  re-
moved.

Summary of Contents for 2001 MR2 Spyder











































































































































































































































Search results

Summary of Contents for 2001 MR2 Spyder

Reviews:

Related manuals for 2001 MR2 Spyder

Brands by name

Popular brands

Toyota 2001 MR2 Spyder, Owner'S Manual

Search results

Summary of Contents for 2001 MR2 Spyder

Reviews:

Related manuals for 2001 MR2 Spyder

Brands by name

Popular brands