Toyota 2001 Land Cruiser Owner'S Manual Download Page 232

Page: 232 / 288

’01 L/C U (L/O 0008)

228

3. Insert your finger into the hole to

push down the shift lock override
button. You can shift out of ”P”

position only while pushing the but-

ton.

4. Shift  into  ”N”  position.
5. Reinstall  the  cover.
6. Start  the  engine.  For  your  safety,

keep the brake pedal depressed.

Be sure to have the system checked by

your Toyota dealer as soon as possible.

If you lose your keys

You can purchase a new key at your

Toyota dealer if you can give them the

key number and master key.

Even if you lose only one key, contact

your Toyota dealer to make a new key. If

you lose all your master keys, you cannot
make new keys; the whole engine immobi-

liser system must be replaced.
See the suggestion given in ”Keys” in

Section 1

−

You can use the wireless remote control
system with the new key. Contact your

Toyota dealer for detailed information.
If your keys are locked in the vehicle and

you cannot get a duplicate, many Toyota

dealers can still open the door for you,
using their special tools. If you must

break a window to get in, we suggest

breaking the smallest side window be-
cause it is the least expensive to replace.

Be extremely cautious to avoid cuts from

the glass.

Summary of Contents for 2001 Land Cruiser

































































































































































































































































































Search results

Summary of Contents for 2001 Land Cruiser

Reviews:

Toyota 2001 Land Cruiser, Owner'S Manual, Page: 232 / 288

Search results

Summary of Contents for 2001 Land Cruiser

Reviews: