Toyota 2001 Land Cruiser Owner'S Manual Download Page 23

Page: 23 / 288

’01 L/C U (L/O 0008)

2. Remove the module from the key

frame.

3. Remove the 2 screws to take out the

lid of the module. Take out the dis-
charged battery and put a new battery

with the positive side up.

NOTICE

Do not bend the terminals.

4. Install the lid with the 2 screws.
5. Install the module into the key frame

and secure the cover with the screw.

6. When pushing any switch on the wire-

less key, make sure the indicator light
comes on.

NOTICE

Make sure the positive side and
negative side of the battery should

be faced correctly.

Be careful not to bend the electrode
of the battery insertion and that

dust or oils do not adhere to the

case.

Take care not to lose the screws.

Close the cover securely.

Summary of Contents for 2001 Land Cruiser

































































































































































































































































































Search results

Summary of Contents for 2001 Land Cruiser

Reviews:

Toyota 2001 Land Cruiser, Owner'S Manual, Page: 23 / 288

Search results

Summary of Contents for 2001 Land Cruiser

Reviews: