Toyota 2000 MR2 Spyder, Manual

Page: 60 / 153

2000 MR2 (EWD408U)
52
STARTING AND IGNITION
I10 IGNITION SW
5–6 : Closed with the ignition SW at ON or ST position
5–4 : Closed with the ignition SW at ST position
C9 CLUTCH START SW
1–2 : Closed with the clutch pedal fully depressed
ST RELAY
5–3 : Closed with the clutch start SW on and the ignition SW at ST position
S1 (A), S2 (B) STARTER
Points closed with the clutch start SW on and the ignition SW at ST position
: PARTS LOCATION
Code See Page Code See Page Code See Page
C9 32 I3 30 N1 31
E3 B 34 I4 30 S1 A 31
E5 D 34 I5 30 S2 B 31
I2 30 I10 33
: RELAY BLOCKS
Code See Page Relay Blocks (Relay Block Location)
1 22 Fusible Link Block (Engine Compartment Left)
2 23 Engine Room R/B (Left Side of Room Partition Panel)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
Code See Page Joining Wire Harness and Wire Harness (Connector Location)
IA1 38 Engine Room Main Wire and Luggage Room Wire (Left Kick Panel)
IC1 38 Engine Room Main Wire and Instrument Panel Wire (Left Kick Panel)
BC1
42 Engine Wire and Engine Room Main Wire (Quarter Panel LH)
BC2
42 Engine Wire and Engine Room Main Wire (Quarter Panel LH)
: GROUND POINTS
Code See Page Ground Points Location
EA 36 Suspension Tower Rear LH
EC 36 Engine Block LH
BI 42 Suspension Tower Front RH
: SPLICE POINTS
Code See Page Wire Harness with Splice Points Code See Page Wire Harness with Splice Points
E1 36 Engine Room Main Wire E4 36
Engine Wire
E3 36 Engine Wire B10 42
Engine Wire
SERVICE HINTS