Toyota 1998 Sienna Page 118 Owner'S Manual Download

Page: 118 / 261

name. SIENNA (U)

118

RESUMING THE PRESET SPEED

If the preset speed is cancelled by pulling

the control lever or by depressing the
brake pedal or clutch pedal, pushing the

lever up in the ”RES/ACC” direction will

restore the speed set prior to cancellation.
However, once the vehicle speed falls be-

low about 40 km/h (25 mph), the preset
speed will not be resumed.

CRUISE CONTROL FAILURE WARNING

If the ”CRUISE” indicator light in the

instrument cluster flashes when using the

cruise control, press the ”CRUISE ON

−

OFF” button to turn the system off and

then press it again to turn it on.
If any of the following conditions then oc-
curs, there is some trouble in the cruise

control system.

The indicator light does not come on.

The indicator light flashes again.

The indicator light goes out after it

comes on.

If this is the case, contact your Toyota

dealer and have your vehicle inspected.

Summary of Contents for 1998 Sienna






































































































































































































































































Search results

Summary of Contents for 1998 Sienna

Reviews:

Related manuals for 1998 Sienna

Brands by name

Popular brands

Toyota 1998 Sienna, Owner'S Manual

Search results

Summary of Contents for 1998 Sienna

Reviews:

Related manuals for 1998 Sienna

Brands by name

Popular brands