Toyota 1998 Sienna Page 31 Owner'S Manual Download

Page: 31 / 261

name. SIENNA (U)

Always make sure nobody places
his/her head, hands and other parts

of the body in the roof opening be-

fore you close the roof. If some-
one’s neck, head or hands gets

caught in the closing roof, it could

result in a serious injury. When
anyone closes the roof, first make

sure it is safe to do so.

Never leave small children alone in
the vehicle,e specially with the igni-

tion key still inserted. They could

use the moon roof switches and get
trapped in the roof opening. Unat-

tended children can become in-
volved in serious accidents.

Never sit on top of the vehicle

around the roof opening.

Summary of Contents for 1998 Sienna






































































































































































































































































Search results

Summary of Contents for 1998 Sienna

Reviews:

Related manuals for 1998 Sienna

Brands by name

Popular brands

Toyota 1998 Sienna, Owner'S Manual

Search results

Summary of Contents for 1998 Sienna

Reviews:

Related manuals for 1998 Sienna

Brands by name

Popular brands