TOX PRESSOTECHNIK TOX-FinePress PFL 002, Original Operating Instructions

Page: 35 / 72

Installation
TOX_Manual_FinePress_PFS-PFL-PFW_en
35
6.3.5 Installing the slide table (optional)
1
10 6 9
8
5
4
2
3
7
1 Base plate 2 Handle
3 Stop 4 Tool plate
5 Grease nipple 6 Fastening holes
7 Fastening groove (T-groove) 8 Retract pneumatic connection
9 Pneumatic the cylinder (op-
tional) 10 Extend pneumatic connection
1. Insert the T-groove nuts into the fastening groove of the press frame.
2. Pull out the tool plate until the fastening holes are accessible.
3. Screw the base plate over the mounting holes using the T-groove nuts.
4. The insertion width is set via the stop.