TOX PRESSOTECHNIK FinePress PFHL, Original Operating Instructions

Page: 4 / 78

Table of contents
4 TOX_Manual_FinePress_PFHL-PFHW_en
3 About this product
3.1 Intended use ............................................................................................. 19
3.1.1 Safe and correct operation........................................................................ 19
3.1.2 Foreseeable misuse.................................................................................. 20
3.1.3 Substances harmful to the wetting properties of lacquers (LABS)............ 20
3.2 Product identification................................................................................. 20
3.2.1 Type plate ................................................................................................. 20
3.3 Product overview and function description................................................ 21
4 Technical data
4.1 Type sheet and data sheet........................................................................ 23
4.2 Compressed air quality and pneumatic connection .................................. 23
4.3 Compressed air press force table ............................................................. 23
5 Transport and storage
5.1 Safety during transport.............................................................................. 25
5.2 Storage when not in use ........................................................................... 26
5.3 Transport by lifting device ......................................................................... 27
5.4 Dispatch for repair..................................................................................... 28
6 Installation
6.1 Safety during installation ........................................................................... 29
6.2 Requirements for installation..................................................................... 31
6.2.1 Set-up location .......................................................................................... 31
6.3 Installing accessories ................................................................................ 32
6.3.1 Installing process monitoring (option) ....................................................... 32
6.3.2 Installing the stroke counter (optional) ...................................................... 33
6.3.3 Installing the force sensor (optional) ......................................................... 34
6.3.4 Installing travel sensor (option) ................................................................. 36
6.3.5 Installing the slide table (optional)............................................................. 38
6.3.6 Installing the tool holding fixture (optional)................................................ 39
6.3.7 Install the TDC sensor (option) ................................................................. 40
6.3.8 Install the BDC sensor (option) ................................................................. 42