TownSteel XCE9000 series, Programming And Users Manual

Page: 5 / 8

XCE9000 PROGRAMMING AND USER MANUAL
5
Program 02 ‐ Add or Change User/Office/Emergency Codes
# [Master Code]
●
0 2
●
[2 ‐ digit Location]
●
[New User/Office/Emergency Code]
●●
Example 1, Add a User Code of “33333” in location 01,
Press: # 12345
●
02
●
01
●
33333
●●
(New User Code = 33333)
Example 2, Add an Office Code of “22222” in location 11,
Press: # 12345
●
02
●
11
●
22222
●●
(New Office Code = 22222)
Note:
1. User Codes, Office Codes and Emergency Codes 2 ‐ digit locations are from 01 to 99.
2. User Codes are located at locations from 01 to 10.
3. Office Codes are located at locations from 11 to 90.
4. Emergency Codes are located at locations from 91 to 99.
Program 03 ‐ Deleting User/Office/Emergency Codes
# [Master]
●
0 3
●
[2 ‐ digit Location]
●●
For example, delete an Office Code located in location 41,
Press: # 12345
●
03
●
41
●●
Note: Obviously the locations should be documented ‐ this should have the same controls as when
issuing keys.
Program 04 ‐ Disable User/Office/Emergency Codes
# [Master]
●
0 4
●
[2 ‐ digit Location]
●●
Note: When you enter the disabled password, blue light and red light will be lit and it will beep,
which means that the password is disabled.
Program 05 – Enable User/Office/Emergency Codes
# [Master Code]
●
0 5
●
[2 ‐ digit Location]
●●