9
Reset Lock to Factory Default Settings
without a Master Code
Steps
1.
Unscrew the back cover.
2.
Locate the reset button on the battery holder.
3.
Press and hold the reset button
.
After approximately 4
seconds,
the lock will beep 2
times, and you can release the reset button.
4.
The
green
LED indicator will light up and it will beep 1 time indicating lock is reset.
Result
Lock is reset to Factory Default Settings.
All codes are deleted and Master Code changes to 123456.
Low Battery Warning
When the battery voltage is low, unlocking the lock will activate a sound indicator as well as a
yellow LED, followed by a
red
LED to indicate low power. Batteries should be changed as soon as this happens.
When locking under low battery voltage condition, the lock will only use the warning sound to indicate low power.
Only 200 operations are allowed under low battery condition - must change batteries to ensure lock operates properly.
