background image

9

SM-24,SM-30  SM36

SMOKEHOUSE ACCESSORIES

_______________________________________________________________________________

RACKS, RACK GUIDES AND CHIP BOXES

Racks and wood chip boxes are popular additions. Units with serial number starting with 55 will accept racks and 

rack guides without modification.  Earlier serial numbers will require replacement skewer rests that will accept 

rack guides. Rack guides fit all units and are required if racks are used

  

STAINLESS STEEL RACKS    

 

 

 

 

 

number 

fits model 

size 

 

 

244332 ___ SM-24 ______ 17”x20  

 

244335 ___ SM-30 ______ 23”x20”  

244336 ___ SM-36 ______ 28

3

4

” x 20”

STAINLESS STEEL RACK GUIDES 

number description

244009 ___ 9 level rack guide

After cleaning rack guides, take note that the top of the guide has a hook to be placed in a slot in the upper 

  skewer rest.

The front of the rack guide has a tab close to the front of each level.  This tab acts as a stop that prevents 

  shelves from being pulled out and falling out of the unit. (figure 1).  

There are left and right sides to the rack guides (figure 2).  Each will have rack stops toward the front edge of 

  each level. 

Hook the rack guides into the skewer rests, making sure the rack stop is located in toward the front of the unit.

The racks may now be placed on the levels as needed.

WOOD CHIP BOXES

number 

fits model 

smoking time

*

 

244000 ___ SM-24 ______ 30 minutes

244001 ___ SM-30 ______ 45 minutes

244002 ___ SM-36 ______ 90 minutes

*

smoking times are approximate

244000

244002

244001

 

USING RACKS AND RACK GUIDES

FIGURE 1

FIGURE 2

Summary of Contents for SM-24-L













Reviews: