manualshive.com logo in svg

Town & Country Fireplaces TCWS54D, User Instructions

Share
Download
Town & Country Fireplaces TCWS54D User Instructions Download Page 6

5056.425217-A

Attention!

• 

Turn off the main gas supply for the appliance during instal-
lation or maintenance of the receiver/module device.

• 

Turn off main gas supply for the appliance prior to removing 
or reinserting the batteries.

• 

In case of remote control malfunction, turn off the fi replace 
using the “on/off” main switch located on the wall.

• 

For installation/maintenance, turn off the fi replace at the on/
off switch located on the wall and at the fi replace power 
supply circuit breaker.

OFF

ON

SMART

MAX

MAX

KEY LOCK

LOW BATTERY ALARM

ROOM

TEMPERATURE

CPI MODE

DIMMER ON

FLAME LEVEL

SET POINT:

TEMPERATURE/LEVEL/STATE

THERMOSTAT OFF/

ON/SMART

TRANSMISSION

* SEE NOTICE REGARDING 

    THERMOSTAT USE

Figure 2:   Profl ame 2 LCD screen details.

NOTICE: The thermostat function is disabled by default. Thermostat function is not
permissible in the USA but is permissible in Canada. Instructions for enabling the thermostat
function in Canada - See “Instructions for enabling the Thermostat function for Canadian 
users.” on page 9

6

TCWS54DST_

160517-16

Summary of Contents for TCWS54D

















Reviews:

No comments

Brands by name

Popular brands

Load more brands